(Pre-Owned) Harman Kardon AVR 132 5.1 AV Receiver With Dolby® Digital, Logic 7 and DTS (Black and Silver)

Harman Kardon AVR 132 – relive music and cinema
As a 5.1-channel AV receiver, the Harman Kardon AVR 132 brings new life to your music and cinema movies – the abundance of surround modes including Dolby® Digital, Logic 7 and DTS ensures that. The extended connection field allows multiple analog and digital sources, including component video sources, to be connected to the receiver. As magnificent as with the AVR 132, your speakers have never been riveted. All Harman Kardon performance data are seriously measured and indicated and already meet the requirements of the new standard CEA 2019. With our multichannel amplifiers, the measurement in watts is carried out at 8 ohms at 0.07% THD and over the entire audible frequency range of 20 – 20,000 Hz. All 5 channels are operated simultaneously and only the minimum output power achieved under these hard measurement methods is entered into the data. For example, our watt data on the paper doesn’t look so lush, but when it comes down to it, in your living room the AVR 132 plays up very big. Because with a maximum power consumption of 540 watts, the power supply can supply all channels with sufficient energy in any situation. Even if full performance in multi-channel operation is required. At short-term peaks, the harman/kardon can always respond sovereignly thanks to the high current power of the amplifier terminal steps of 25 amperes.

Your advantage: perfect sound instead of marketing watt information
This power package is complemented by an FM (stereo)/MW receiver with 30 drive memory, allowing direct input of the reception frequency. A bass management with 3x crossover helps you find optimal bass balance for the different speaker groups (front/middle/rear) Adjustable transition frequencies: 40Hz, 60Hz, 80Hz, 100Hz, 120Hz and 200Hz. The programmable remote control can control up to 7 devices.

• Dolby Pro Logic® II.
• Logic 7®, 5.1.
• DTS®
• HDTV-ready component video
• 3-fold crossover
• High power (HCC)
• 192 kHz/24 bit D/A converter

Key features:
Audio part – sine output power (FTC, stereo mode): 40 watts per channel, 20 Hz – 20 kHz, at <0.07% distortion factor, both channels at 8 ohm; five-channel surround mode: 30 watts per channel, 20 Hz – 20 kHz, at <0.07% klirrrring. factor, all channels. 8 ohms powered, high current capacity (HCC): ±25 A.
Dimensions (H x W x D) and weight: 165 mm x 440 mm x 382 mm, 10.9 kg (the specified device depth contains protruding control buttons and the connections on the back of the device. The legs are included in height.)

Special features:
• Output power 30 W x 5 at 8 ohms, 20 Hz – 20 kHz at <0.07% distortion factor, when using all channels simultaneously under full control
• High power (± 25 A) power amplifier with ultra-wide frequency response (10 Hz – 100 kHz).

Surround Processors
• Dolby Digital Surround decoding using the Cirrus Logic® CS 49510 32-bit DSP processor
• Full set of DTS operating modes (5.1)
• Dolby Pro Logic II (movie, music and game modes) surround sound
• Harman exclusive: Logic 7 in 5.1 surround mode (Cinema and Music)
• 5-channel stereo, hall and theater surround modes.
• 192 kHz/24-bit DA converter

Inputs and outputs
• Two freely assignable, broadband (100 MHz) HDTV-ready components video inputs and one output
• Subwoofer output for an active subwoofer.
• Four audio/video inputs including S-Video jack and two separate audio inputs
• Six-channel direct input for the operation of external surround decoder
• Audio/video inputs (incl. S-video) on the front for comfortable connection of game consoles and portable sources.
• Six digital inputs (two optical and two coaxial on the back and one optical and one coaxial on the front)

Comfort Features:
• FM (stereo)/MW receiver with 30 drive memory; direct input of the reception frequency possible.
• Bass management with 3-fold crossover
• Adjustable transition frequencies: 40Hz, 60Hz, 80Hz, 100Hz, 120Hz and 200Hz
• Programmable volume preset.